I am not too sure if this post is suppoesed to be here so forgive me if I am mistaken. I am trying to run some native NT backups from a workstation to copy onto a remote server as a fallback incase the workstation suffers a hard disk failure or accidentally looses the data by deleting it by mistake. When the backup is set to run it keeps getting this error message "Backup Status
Operation: Backup
Active backup destination: File
Media name: "Test Backup.bkf created 10/21/2004 at 2:05 PM"
Insufficient disk space. Verify that you have full access to the working folder and there is disk space available."
I made sure the user has full access and control to their home directory, and also I checked the disk space storage and there is plenty of sapce available!!
Can anyone tell me what is the cause of this problem. I tested this on several users and all seem to be having this problem now, if anyone has experienced this same problem I would definitely appreciate any input.
Thanking anyone in advance who will be kind enough to post me a reply
)
Operation: Backup
Active backup destination: File
Media name: "Test Backup.bkf created 10/21/2004 at 2:05 PM"
Insufficient disk space. Verify that you have full access to the working folder and there is disk space available."
I made sure the user has full access and control to their home directory, and also I checked the disk space storage and there is plenty of sapce available!!
Can anyone tell me what is the cause of this problem. I tested this on several users and all seem to be having this problem now, if anyone has experienced this same problem I would definitely appreciate any input.
Thanking anyone in advance who will be kind enough to post me a reply
)