irlmcdolan
IS-IT--Management
What is the easiest method for obtaining a group (member) count in Netware 5?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Novell Netware 5 Group Count
- Thread starter irlmcdolan
- Start date
- Status
salserocito
MIS
Making sure your Context is correct, from a DOS Prompt, type the following...
For ALL of a specific Groups details...
NLIST GROUP=<GroupName> /D
To list just the members of groups...
NLIST GROUP SHOW "MEMBER"
Hope this helps!
Good Luck!
For ALL of a specific Groups details...
NLIST GROUP=<GroupName> /D
To list just the members of groups...
NLIST GROUP SHOW "MEMBER"
Hope this helps!
Good Luck!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question