Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nothing logged in event Viewer 1

Status
Not open for further replies.

cceng

IS-IT--Management
Joined
Aug 27, 2001
Messages
104
Location
US
Any one else run accross this? I know I should have some things logged in the event viewr but nothing is in there. This is the case for Application, System and Security.

I have tried reapplying the sp.

Thanks!

Chris
 
A wild guess - you have a filter set?
Another wilder guess you have a policy with a zero size quota.

Is the problem on one machine or serveral?
 
It is on just one machine. I am not sure what you mean by filter.

Thanks!

Chris
 
Are you using SP4? If so I had the same problem and apparently there is a known issue with event logs corrupting. See the following from Microsoft:
The way I fixed it was just to clear the event logs and then they started logging again. Good luck.
 
Thanks!

That took care of it.

Chris
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top