wildchildsixx
MIS
hi i am wondering if i should only see my scsi controller in the scsi set up? i have 5 drives in place but only see the controller in the utilities. is this normal?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
not seing ard drives in scsi setup
- Thread starter wildchildsixx
- Start date
- Status
- Status
Similar threads