BrianRussell
Programmer
When I preview a report from designer I get data on the info server but when I schedule the report and view it I get no data. I use the same prompts for both. Any Ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
not data when viewed from Crystal Desktop
- Thread starter BrianRussell
- Start date
- Status
Hi,
Sometimes we get this.
Two things to check.
Try opening the report in Info Analyser and Viewer. Sometimes a report will be blank/wrong in one and OK in the other.
Sometimes people enter date parameters incorrectly causing a blank report. Some of our reports need the date to be added as 'Date(YYYY,MM,DD)' on desktop but in Designer you can just enter 'DD/MM/YY' depending on how the report has been set up.
Jon
Sometimes we get this.
Two things to check.
Try opening the report in Info Analyser and Viewer. Sometimes a report will be blank/wrong in one and OK in the other.
Sometimes people enter date parameters incorrectly causing a blank report. Some of our reports need the date to be added as 'Date(YYYY,MM,DD)' on desktop but in Designer you can just enter 'DD/MM/YY' depending on how the report has been set up.
Jon
- Status
Similar threads
- Locked
- Question
- Locked
- Question