Nortel TM 3.0

[srtelengine]

I have just upgraded from 2.0 to 3 and now none of my scripts seem to work properly for dial-up. It dials out and connects with the SEB but just sits and never starts the login script. Also does anyone a record layout for importing stations into TM 3.0. I know that it is suppose to be a CSV file, but cannot find the required layout.

Thanks,

Dwayne

 

[johnpoole]

i haven't used tm for a while because of that type of problem.. can you post that dial up script.. i can usually help with those.. i have posted procomm scripts that do the same thing.. those give the user all the control but none of the gui.. tm is much better, until it breaks..

john poole
bellsouth business
columbia,sc

 

[joseph67]

Hallo John,
i upgradet from OTM 2.2 to TM 3.0 and i have the same problem as Dwayne. I have connect but the login script never start.
I have following script:
Await Text: PASSWORD(come from modem)
Timeout: 3 (i tested to 30)
Send Text: $MODEMPWD^M



Bits per second:9600
Data bits:8
Parity:None
Stop bits:1
Flow control:None

Thanks,
Joseph
Munich,
Germany

 

[acewarlock]

Try 9600, 7, none, 1

 

[srtelengine]

John,
My script is exactly like Joseph, I also worked with Stan B(RMAC) for almost 2 weeks and he could not figure it out.
Acer,
I have tried every baud, parity and stop combo I can think of even tried different modems. The strange thing is that I can bring up my old 1.3 version and it dial and connects everytime and using the same modem.

So I am still stumped.

Dwayne