Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Norstar

Status
Not open for further replies.
twbower

twbower

MIS
Joined
Feb 2, 2007
Messages
30
Location
US
It has been a while, if I am just swapping phones at a desk, phone display bad, I don't need to relocate. Can the phone just be plugged in and go or does something else need to occur on the system?

Regards,
Terry
 
Sort by date Sort by votes
Should be able to just change the phone out.
 
Upvote 0 Downvote
Should be able to just change the phone out.
Click to expand...
... as long as the phones are of the same type. Swapping a T7316 for a T7316e, for example, won't retain button programming
 
Upvote 0 Downvote
... I always make sure set relocation is at NO when swapping out phones. Just in case.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Nortel Meridian w/ Norstar Flash CCR issue
Replies
11
Views
2K
Synapt
S
T
  • Locked
  • Question Question
Norstar help
Replies
14
Views
2K
curlycord
curlycord
roycep
  • Locked
  • Question Question
Nortel Norstar: Remove one extension from night ringing group
Replies
3
Views
670
roycep
roycep
T
  • Locked
  • Question Question
More lines into Norstar system
Replies
15
Views
2K
curlycord
curlycord
A
  • Locked
  • Question Question
call log for Nortel T7316e
Replies
1
Views
562
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top