Your asking a Norstar question, different thread. But, I know Norstar. You need go into programming under the DN of the telephone, under Line Access, Intercom, make the # whatever # you want. On a M7208 it's 0-6.
No the Phone system, is it a Norstar or an Option 11 or 61 or 71 or 81, if you don't know that maybe if you know What is the model number of one of your phones???
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
Quote
Sorry-novice here. How do I set up/create an Intercom button for a user who doesn't have one?
When you plug a phone into a jack connect to the system, it get everything that is programmed to that port for that type of set. You shouldn't have to programm anything to get a Intercom/DN key. An intercom key and DN Key are the same in the Norstar.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.