Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel BCM400 SIP connectivity to MS Exchange Server 1

Status
Not open for further replies.
redbeard77

redbeard77

Vendor
Joined
Jul 9, 2008
Messages
9
Location
CA
Does anyone have any experience integrating a Nortel BCM400 to a MS Exchange server (2003 or 2007) via SIP? Any documentation available
 
Sort by date Sort by votes
It is not going to work yet. 2007 will work with an external gateway, but from what the CLP told me, BCM will not be supported until the global release software, or later.
 
Upvote 0 Downvote
Thanks nooop. Any recommendation on gateway (dialogic, etc.) and any documentation on configuration available
 
Upvote 0 Downvote
Does anyone know what external gateway would work for SIP connectivity between a BCM and MS Exchange Server?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Nikos Koulioumbis
  • Locked
  • Question Question
BCM400 release 4.0 services
Replies
3
Views
531
Firebird Scrambler
Firebird Scrambler
AShammah
  • Locked
  • Question Question
BCM50/FreePBX integration Sip or H.323
2 3
Replies
59
Views
5K
AShammah
AShammah
MoJHK
  • Locked
  • Question Question
Emetrotel SIP trunk to IPO500V2
Replies
1
Views
430
curlycord
curlycord
cndr99
  • Locked
  • Question Question
BCM400 => Asterisk: no ringing near end ex BCM
Replies
10
Views
960
curlycord
curlycord
AShammah
  • Locked
  • Question Question
Nortel/Spectralink 2211/2210 firmware
Replies
15
Views
1K
AShammah
AShammah

Part and Inventory Search

Sponsor

Back
Top