Norstar MICS 6 with NAM 4.1 & DISA DN

[sstren]

Is it possible to route through a NAM 4.1 to a DISA DN?

The system has 3 digit DN's and 4 digit Rec'd # as we are using a PRI.

The only way I have been able to successfully access the DISA DN is by setting the DISA DN to the last 4 digits of a DID and dialing in direct to that number.

I would prefer to access the DISA DN through the main (pilot) number if possible as this line has a toll free number but it is always answered by VM.

Has anyone successfully had this working through a NAM?

 

[curlycord]

Perhaps forward a path to call out and back in to a DID?

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[sstren]

Did that, but it will use 4 B channels to dial out a number...
1) toll free in
2) outbound x-fer through a VM box to DISA DID.
3) DISA DN in
4) Call out

is there any other way?

 

[curlycord]

Get an ATA, hook it back out to a spare trunk.
When you get AA dial the ATA's ext.
lol

I am not sure how billing is for an 800, in my mind its per call but if you get another 800 and dont advertise it or use it as a back door for sale people also.

I dont know!





=----(((((((((()----=
curlycord

http://www.curlycord.com