Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Norstar 8X24
- Thread starter bigddog
- Start date
- Thread starter
- #3
curlycord
Programmer
We call them C6 or C8 modules.
C6 for 6X16's and C8 for 8X24's but both will work on each other.
So if you have only 4 lines and the C6 is a lot cheaper you could go with that.
Somebody may confirm this.
=----(((((((((()----=
curlycord
C6 for 6X16's and C8 for 8X24's but both will work on each other.
So if you have only 4 lines and the C6 is a lot cheaper you could go with that.
Somebody may confirm this.
=----(((((((((()----=
curlycord
misseditbythatmuch
Technical User
curlycord
Programmer
Short answer without all that reading is C6 only good for 6X16, C8 works on both.
Stick with what you have.
=----(((((((((()----=
curlycord
Stick with what you have.
=----(((((((((()----=
curlycord
fireeater
Technical User
- Dec 10, 2008
- 780
just add on info:
if you have a trk module attached to the system you can use the ci cards for those lines
HALLOWED ARE THE ORI
mike
if you have a trk module attached to the system you can use the ci cards for those lines
HALLOWED ARE THE ORI
mike
- Status
Similar threads
- Locked
- Question