Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No valid "Boot System" Command
- Thread starter newall
- Start date
CCIEWANNABE
MIS
This should answer your problems.
Link:
See section "Without a valid Cisco IOS Software image in Flash, you have four different possibilities"" Route once; switch many
Link:
See section "Without a valid Cisco IOS Software image in Flash, you have four different possibilities"" Route once; switch many
- Status
