No login in CLI and port 7071 possible

[derfloh]

Hey guys,

I installed a virtual IPO 11.1.2.2 today (VMWare from OVA). Changed IP through CLI (bad documented - it tells to set the gateway IP but not where to do this). Did the ignition through port 7071 and set all the passwaord.

After waiting 8min I was able to login as Administrator using port 7070 and with Manager. But not at the CLI (VMware Concole as well as SSH) and not using port 7071.

Did anyone had the same issue? And a solution?

I created a snapshot before doing the ignition and tried the same process again with the same result. Resetting the security settings let's me set the passwords again but the issue is still the same.

For me it looks like if there is an issue with setting the linux password. Next I would lokk for the "referred authentication" settings but I can't because I cannot accss port 7071. neither directly not through the "platform view" link in 7070 solution overview.

Any help is appreciated.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN