Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No internet connection

Status
Not open for further replies.

arnaudvdv

Technical User
Apr 19, 2002
25
NL
Hi everyone,

I dont have Internet connection with the following setup:

I have a Firebox 700 setup in the following manner:
Routed mode
External IP aa.bb.cc.14
Gateway IP aa.bb.cc.13 (this is my Internetmodem no NAT)
Internal IP 192.168.2.1

NAT is configured to use 192.168.2.0/24

From a workstation I can ping trusted interface and I can ping External interface (aa.bb.cc.14) but I cant ping aa.bb.cc.13 (modem).

In the log I get denied packets from the Internetmodem (aa.bb.cc.13) to aa.bb.cc.19) on port 520.

This works fine with a WatchGuard SOHO but cant get it to work with a Firebox III 700.

Anybody an idea??
 
I forgot: my router IP aa.bb.cc.13 also shows up in automatically blocked sites list, so I put its ip in Blocked Sites Exceptions.

Thx in advance
 
can you take a look and see if you have a dynamic NAT entry for trusted-external. Also you do have rules for outgoing ping, dns, http configured
 
Yes, I have an entry for trusted-external. Further it is a standard setup. I made the ping-service log everything (allowed and disallowed, incoming and outgoing). When I ping the modem (aa.bb.cc.13), I do get an allowed outgoing logentry but no denied incoming.

Thx for responding.
 
are you able to ping anything else on the net such as your ISP DNS servers etc?
 
No, I cant get through the firewall, from the trusted side (LAN) the furthest I get is pinging the External interface of the Firebox.
 
you seem to have the correct setup the only other thing that I can think is to change the external interface on the firebox to be 10MBps and full duplex as opposed to auto. this is under network...configuration...NIC configuration I have had issues with it being auto in the past. if this does not work run the inital setup again and see if this makes a difference
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top