No Inline Power w/avaya phones

[myng94]

I cannot get any power to my avaya phones from the the switch. I've "set port inline power x/x auto" still no power.

slot 9 - WS-X6148-RRJ45V
system ver: 7.1
system file: cat6000-sup2k8.8-2-2.bin

Do you guys have any suggestions?

Currently, I only have 2 phones connected.

 

[ADB100]

What inline power daughter-card do you have installed? The cisco pre-standard inline power devices won't power non 802.3af devices.

Andy

 

[myng94]

No daughter-card installed. Do you have a part# for the card? thanks for your help

 

[ADB100]

There should be a single Green LED at the bottom right of the card labelled Phone - if the daughter card is installed this will be on.

WS-F6K-VPWR - This is the Cisco Pre-Standard PoE daughter card

WS-F6K-FE48-AF - This is the 802.3af and Cisco Pre-Standard PoE daughter card

I think you need a minimum of CatOS 8.2(1) and you will need to check with your supplier the daughter-card will work with your 6148 modules, chassis and PSU's.

Good luck

Andy