Night Service

[DJSECI]

I am trying to set up a night service for MICS using a call pilot.
I want to program a button so that the telephone system will go to automated attendant

 

[senk1s]

Rough Overview ...
1. Designate a control set for the lines
2. Program a ringing group with the VM DN in it and assign the lines to it
3. On the control set program a button for F871 (ringing service)- use it to change schedules

 

[SupportDude]

senk1s provides a good rough overview.
There is no "one" button approach.
Some programming is required.
I suggest using Ring Group 002.
Don't forget to change the schedule for "Night" to manual.

HTH!

SD