Issue: We have a CS 1000M with Symposium Link 5.0, we installed a NICE recording solution but for some reason the NICE system is not getting any TN/DN information from the Switch. We pointed the NICE system to another Symposium link 5.0 system in another site and it works fine. So the issue seems to be local with this site. Is there anything on the CS 1000M which would prevent sending the TN/DN info. through Symposium Link. The following are the basic configuration required for IP Recording. Ld 17 PARM: IPIE = "YES", Telephone configs: AST 00 01 and CLS ICR = ICRA. I have everything working ok at two other locations but at this one site it's just not working. Any input would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NICE Perform issue with CS 1000M
- Thread starter GTexx
- Start date
- Thread starter
- #2
Don't know if this helps any to identify issue: This is the response from a working system and the system with the issue..
Non-working System: missing DN/TN field in the response.
Request to CS 1000M (Site A)
FF0A00190C02000105000F0901058132393034FD0300B50301
Monitor Request
Invoke ID: 2
DN 2904 Extension
DMS: True
MARP/MADN: False
Response from SBC
FF0A000D0C0200010600710300
Monitor Response
Invoke ID: 2
Result: Success
---------------------------------------------------
Working Site - Everything works fine.
Request to CS 1000M (Site B)
FF0A00190D03000105000F0901058136313235FD0300B50301
Monitor Request
Invoke ID: 3
DN 6125 Extension
DMS: True
MARP/MADN: False
Response from ADC
FF0A00250D0300010600B503013608000036313235EC060090150037049141B40301710300
Monitor Response
Invoke ID: 3
This DN: 6125
This TN : 9141
Result: Success
Non-working System: missing DN/TN field in the response.
Request to CS 1000M (Site A)
FF0A00190C02000105000F0901058132393034FD0300B50301
Monitor Request
Invoke ID: 2
DN 2904 Extension
DMS: True
MARP/MADN: False
Response from SBC
FF0A000D0C0200010600710300
Monitor Response
Invoke ID: 2
Result: Success
---------------------------------------------------
Working Site - Everything works fine.
Request to CS 1000M (Site B)
FF0A00190D03000105000F0901058136313235FD0300B50301
Monitor Request
Invoke ID: 3
DN 6125 Extension
DMS: True
MARP/MADN: False
Response from ADC
FF0A00250D0300010600B503013608000036313235EC060090150037049141B40301710300
Monitor Response
Invoke ID: 3
This DN: 6125
This TN : 9141
Result: Success
nicetechie
Technical User
can you send us some logs post having made a test call ?
- Thread starter
- #5
The issue has been resolved getting the latest patch that was available for Symposium 5.0. The system works ok now. Just have to battle another issue with a site running Symposium 4.02 (I know its a little old but it's what we have to work with right now)
- Status