Ever eager not to lose my job in the current round of shakeups at my company I put forward a bold proposal that made me indispensible, to do complete overhaul our network and get a new broadband line to go with it etc.
So far so good, just one problem I have done MCP's in 2003 environ/infractructure etc, but I have touched routers.
My headache is this we have 8 public address's on a 255.255.255.248 subnet. I have put the outward and inside facing address's into the router and setup NAT (193.66.*.* out and 195.194.*.*) now how in the name of Zeus's butthole do I connect my private address range network to the router for NAT'ing? I must of fallen asleep during the linking subnets or whatever session cause my brains gone blank, or is there just an easier way.
So far so good, just one problem I have done MCP's in 2003 environ/infractructure etc, but I have touched routers.
My headache is this we have 8 public address's on a 255.255.255.248 subnet. I have put the outward and inside facing address's into the router and setup NAT (193.66.*.* out and 195.194.*.*) now how in the name of Zeus's butthole do I connect my private address range network to the router for NAT'ing? I must of fallen asleep during the linking subnets or whatever session cause my brains gone blank, or is there just an easier way.
