Newbie Port forwarding question for PIX 506

[sidetracked]

Im doing something wrong..can someone look at this config, I can't seem to get my web server or exchange or any services to map??


PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password encrypted
passwd encrypted
hostname ANR
domain-name domain.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
pager lines 24
interface ethernet0 10full
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 192.168.10.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp x.x.x.147 pop3 192.168.10.2 pop3 netmask 255.255.255.255 0 0
static (inside,outside) tcp x.x.x.147 smtp 192.168.10.2 smtp netmask 255.255.255.255 0 0
static (inside,outside) tcp x.x.x.147

http://www 192.168.10.2

http://www netmask

255.255.255.255 0 0
static (inside,outside) tcp x.x.x.147 3389 192.168.10.2 3389 netmask 255.255.255.255 0 0
conduit permit tcp host x.x.x.147 eq

http://www any

conduit permit tcp host x.x.x.147 eq 3389 any
conduit permit tcp host x.x.x.147 eq smtp any
conduit permit tcp host x.x.x.147 eq pop3 any
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
http server enable
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet timeout 5
ssh timeout 5
dhcpd auto_config outside
terminal width 80


MCSE 2K - MCSA 2K - NET+ - A+

Paul..

 

[rudeboy]

Can this server access the web through the PIX ok? Can you access the services locally?

 

[sidetracked]

Ok it was my mistake..i had proxy settings on the client machine out of the network. But i reset the pix in order for these changes to take effect. will I have to power off power on the pix after each change...or is there some type of command..?

MCSE 2K - MCSA 2K - NET+ - A+

Paul..

 

[lgarner]

Configuration changes on the Pix take effect immediately. They will *not* be effective after a reboot unless you first write them to NVRAM via "write mem".

 

[sidetracked]

oh thats what i was doing...write m.


Thanks for the help

MCSE 2K - MCSA 2K - NET+ - A+

Paul..