new tie lines cant tandem call in one direction

[chrislxx]

I know I am forgetting something here but this is my problem.

I have TIE Trunks coming in from different cities; I use CDP to point to a route.

There originally 3 satellite cities they can all call each other.

I added the 4th last week, it can call everyone, but when others try to call them tandoming through the main PBX, the call dose not complete. The following is the information from the MSGI / MSGO at the tandem PBX.

DCH 5 IMSG SETUP REF 00008005 CH 25 5 TOD 19:26:14
FEAT :NCID
PROGRESS: ORIG ADDR IS NOT ISDN
CALLING #:3250 NUM PLAN: PRIVATE
CALLED #:1962 NUM PLAN: PRIVATE

DCH 5 OMSG REL COMP REF 00008005 CH 25 5 TOD 19:26:14
CAUSE :SWED EQIP CONGESTION
DIAG: 093

Locally on the Main PBX they can dial normally to that location.

Thus the Local CDP works

The distant PBX making the call routs it correctly to the main PBx thus the other CDP is also correct.

The only difference is that the ones that work completely correct are PRI and the new route is DTI I do not know if that matters.

The TGAR is 0 (we are using TGAR) the same as the other TIE trunks.

NCOS is 4 the same as the other trunks.

Any Ideas would be greatly appreciated.

We also have tennant service enabled, but i thought that only effected tennant to trunk and tennant to console.

Chris

 

[johnpoole]

your right on tennant, but be sure that all tenants have access to all routes.. tgar 0.. seldom use tgar targ any more.. just for a test go to the routes and targ x0... removes all tgar/targ blocking, if needed you can put it back on.. but that will determine if the trouble is tgar or frl..

john poole
bellsouth business
columbia,sc

 

[Odie21]

Chrislxx,

Did you ever find a solution to your

SWED EQIP CONGESTION

problem? We are trying to tandem the calls also and are getting the same error.

 

[nortelfonguy]

John is correct, but be sure to check your DSEL and make sure they match. If you have VCE on one rt. and VOD on another it can cause SWED EQUIP Congestion. Hope this helps