Is there something in the configuration of DSC that will not allow me to pass CLID/CPND across the network?
I just got CPND working in my system (many thanks to this forum), but I just found out we are not passing that info to the other three systems connected. For example, when I call to site B, they get my name and number, but a call that is made from the outside world, via PRI and then passed to site B, they only get the name associated with the tie line (this is configured on the tie line at Site B). This connection is set up as DSC, so I am thinking there is something in the tie line config or the DS1 that I am just not seeing.
For reference, I have the two PRI lines coming into my system, which is G3siV12 (Version 2.1 I believe). The connection to the second site (Site B)is via 2 tie lines, configued as DSC. The second site is G3siV11 (Version 1.2). Please let me know if there is any other info I can provide that would help.
I am used to the Nortel world, where this info was passed in the same was as internal info is.
Thanks in advance,
Scott M.
I just got CPND working in my system (many thanks to this forum), but I just found out we are not passing that info to the other three systems connected. For example, when I call to site B, they get my name and number, but a call that is made from the outside world, via PRI and then passed to site B, they only get the name associated with the tie line (this is configured on the tie line at Site B). This connection is set up as DSC, so I am thinking there is something in the tie line config or the DS1 that I am just not seeing.
For reference, I have the two PRI lines coming into my system, which is G3siV12 (Version 2.1 I believe). The connection to the second site (Site B)is via 2 tie lines, configued as DSC. The second site is G3siV11 (Version 1.2). Please let me know if there is any other info I can provide that would help.
I am used to the Nortel world, where this info was passed in the same was as internal info is.
Thanks in advance,
Scott M.