Hi all, very simple question. I have a brand new 5510 and need to set it up for internet access. I cannot figure it out. I know this is simple but I'm not really the Cisco guy here. the 2 interfaces are:
ethernet 0/0 (inside) 192.168.30.3
ethernet 0/1 (outside) dhcp 72.39.x.x 255.255.254.0
What would be the right commands to get internet access from the 0/0 subnet to the internet. And is it both NAT and Security Policy?
Cheers
Phil
ethernet 0/0 (inside) 192.168.30.3
ethernet 0/1 (outside) dhcp 72.39.x.x 255.255.254.0
What would be the right commands to get internet access from the 0/0 subnet to the internet. And is it both NAT and Security Policy?
Cheers
Phil