CarrierTech
Technical User
I added six new analog boards in four different gateways and the system doesn't see them. What do I need to do to initialize them?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
new analog boards
- Thread starter CarrierTech
- Start date
- Status
smokinjoe2938
Programmer
most likely upgrade to the latest firmware
- Thread starter
- #3
CarrierTech
Technical User
It doesn't even see the boards. Do I need to reset the media gateway for them to see the boards?
smokinjoe2938
Programmer
nothing to loose as it is not seeing them, give it a try also make sure thumb screws are screwed all the way in so the card is properly seated!
mojoputter
Technical User
So if you access the gateways can you do a Show MM and see them..? when you plug them in did the lights come on..?
- Status
Similar threads
- Locked
- Question