New 3300 CX II - reboot all time - hard Disk 50006266 - CX(i) V9.1.0.92 sata SSD

[luxmitel]

Hi, I`ve received a new CX II to install with a hard disk 3300CX8i) sata SSD V9.1.0.92
when I power on the controler, he restart all time with the following error:

Error load0xing file: errno = 3ecd60280x (tBoot): dosFsLib.c : media not formatted or not present
c0006.
Can't load boot file!!




all data:

VxWorks System Boot


Copyright 1984-2002 Wind River Systems, Inc.





CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/15
Creation date: Oct 20 2014, 15:43:02




Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device : ata=0,0
unit number : 0
processor number : 0
file name : /partition1/rtc8260
inet on ethernet (e) : 192.168.1.2:ffffff00
gateway inet (g) : 192.168.1.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc


Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
0KB added to /partition1 partition
free disk space after partition 0 is 0KB
0KB added to /partition2 partition
free disk space after partition 1 is 0KB
0KB added to /partition3 partition
free disk space after partition 2 is 0KB
0KB added to /partition4 partition
free disk space after partition 3 is 0KB
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/partition1) on controller 0 drive 0... done.
Creating Cache Layer for partition 1 (/partition2) on controller 0 drive 0... done.
Creating Cache Layer for partition 2 (/partition3) on controller 0 drive 0... done.
Creating Cache Layer for partition 3 (/partition4) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/partition1) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/partition2) on controller 0 drive 0... done.
Creating Dos FS device for partition 2 (/partition3) on controller 0 drive 0... done.
Creating Dos FS device for partition 3 (/partition4) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /partition1/rtc8260...usrFdiskPartLib: warning: invalid partition entry encountered block 0, entry 0, sys type 83, Skipped
usrFdiskPartLib: warning: invalid partition entry encountered block 0, entry 1, sys type 83, Skipped
usrFdiskPartLib: warning: invalid partition entry encountered block 0, entry 2, sys type 83, Skipped
usrFdiskPartLib: warning: invalid partition entry encountered block 33587200, entry 0, sys type 83, Skipped
0x3ecd6028n/a
(tBoot): dosFsLib.c : ERROR reading the device boot sector

Error load0xing file: errno = 3ecd60280x (tBoot): dosFsLib.c : media not formatted or not present
c0006.
Can't load boot file!!


did you know what I need to do it to fix this?
Thank you

 

[jpruder]

I think the controller and drive have mismatched OS. You can Boot_Install a previous version then migrate or flash the bootrom to linux version.

 

[sarond]

This is an article on KMSif you have access to that.

HO3651 - How to migrate or update bootloader from U-Boot to Bootrom or vice versa

Also the below document may be of help.
Migration Guidelines

 

[luxmitel]

Thank you Guys for your help.