new 2801 - BGP Error "Protocol not in this image"

[ndinc]

When I tried to configure the BGP I get the following error; "Protocol not in this image"

What version of IOS do I need to use BGP? Do I have the wrong router?

Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(16a), RELEASE S
OFTWARE (fc2)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 10-Sep-07 10:27 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

System image file is "flash:c2801-ipbase-mz.124-16a.bin"

Cisco 2801 (revision 7.0) with 114688K/16384K bytes of memory.

2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
63808K bytes of ATA CompactFlash (Read/Write)


Thanks for your help

 

[brianinms]

You need IP PLUS or better.

 

[vipergg]

Brian is correct you have the least featured image version . You will have to get a contract upgrade from cisco and upgrade the image.