new 16xx 1.3 firmware

[JayNEC]

http://support.avaya.com/css/appmanager/public/support/Downloads/P0468/C2010691632314330_7

Has anyone tried this on IPO yet? The release notes do not specifically say that it's IPO compatible.

 

[DennyHeack]

I'd say it won't work:

Notes:

•Release 1.3 requires Communication Manager 3.1 or higher or Distributed Office 1.1

 

[hairlessupportmonkey]

Did you read the whole page?

Usability

* IPO 5.0 Support for Call Log, Contacts, Redial, Text Entry, where the IPO directly controls the telephone display for the specified applications.
* IPO 6.0 Support for graphic display (bit-mapped) phones ("-I" phones), whereas previous IPO releases only supported character-based display phones.

 

[tlpeter]

But that is already included in the current file.
But for who do not read the whole page:

Bright, backlit displays
2-way speakerphones on all models
Familiar telephone interface with fixed feature keys and LED buttons
Integrated Contacts list and Call Logs

Notes:
Release 1.3 requires Communication Manager 3.1 or higher or Distributed Office 1.1
Release 1.3 includes: H.323 firmware Release 1.3 for the 1616, 1608, 1603, 1603C, 1603SW, 1603-I, 1603SW-I, 1608-I, 1616-I IP Telephones, and BM32 Button Module Release 1.0.9.
Enhancements included in Release 1.3:
Usability
Missed call counter
Turning off the audible altering completely
Audio Environment and Expander enhancements (AUDIOENV)
Serviceability
Factory test enhancements
Enhancements included in Release 1.2.2:
Hardware
Support for new telephone model, 1603-I.
Support for white backlight Liquid Crystal Display (LCD) on localized ("-I") phones. These white backlight phones can only load this R1.2.2 and later releases.
Usability
IPO 5.0 Support for Call Log, Contacts, Redial, Text Entry, where the IPO directly controls the telephone display for the specified applications.
IPO 6.0 Support for graphic display (bit-mapped) phones ("-I" phones), whereas previous IPO releases only supported character-based display phones.
Networking
Support for LLDP-MED Network Policy Discovery TLV, which simplifies deployment of large multi-vendor networks and aids in troubleshooting; this TLV lets endpoints advertise their vlan and Layer 3 priority assignments to each other.
Serviceability
A new internal ip-address is used by the factory test software for the white backlight "-I" models. All the other phone models use the same previously used test ip-address.
Review the Readme file for other exception fixes included in Release 1.2.2.
Enhancements included in Release 1.2.1.1:
Support for IPO 5.0 features: Call Log, Contacts, Redial and Text Entry
Additional LLDP TLV support
Review the Readme file for other exception fixes included in Release 1.2.1.1
Enhancements included in Release 1.2:
Implementation of Link Layer Discovery Protocol (LLDP) support
PROCPSWD Entry Procedure Screen
Review the Readme file for other exception fixes included in Release 1.2
Enhancements included in Release 1.1:
Add support for 1603SW (1603 with second Ethernet jack)
Support for 5 additional languages:
Arabic, Hebrew, Korean, Simplified Chinese, and Traditional Chinese
CM5.2 Native Support
13 digit dialing
802.1x multicast forwarding with proxy-logoff
Support for three BM32 on IP Office
Button Module (BM32) version Identification (in local procedure MUTE+VIEW#)
5 digit rasid (for more flexible field tracking of software releases)
Review the Readme file for other exception fixes included in Release 1.1.
Enhancements included in Release 1.0.3:
16xx: phones clipping audio when IP-to-IP enable
1608: has delayed cut thru of audio during shuffled call
16xx phone with a headset button selected does not re-register to CM after a network outage.
16xx not acting upon "reset ip-stations..." while headset is active
Network Quality screen 500ms delay spike
Support for 2 BM32

Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

A yard full of tards

 

[ToxicMyst]

Just installed on a 1616 I have on my desk, using IP Office 412 v5.0(18) seems to be working fine. At least it can't be any worse than the last set of firmware they shipped!

:0)

 

[JayNEC]

hairlessupportmonkey: The mentioned support for IPO is under the 1.22 section. No mention of IPO support under the 1.3 section.

 

[tlpeter]

But it works (just upgrade one 1608)
There are only no new features i guess ( did not try to find them)


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

A yard full of tards

 

[JayNEC]

Actually, the new feature that I was looking at is the fact that the audioenv type settings in the 46xxsettings.txt file do now take effect. Before, the 16xx phones completely ignored these settings.