I have recently networked a Definity V11 to a Siemens ISDX over a DPNSS link. I have used the Westell IQ2000 converters on the definity to convert to QSig. Problem I have is that extensions on the Siemens switch which are diverted to mobiles or Vmail do not connect to these endpoints when a call is made from the Definity. If the call is not diverted it will hit the extension on the ISDX. Does the Definity require additonal software switched on for this to work or is this controlled via the converter or ISDX. Any comments welcomed.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Networking Definity (V11) to Siemens ISDX
- Thread starter ali35
- Start date
Similar threads
