network two switches

[JZJerry]

I have 2 switches. Switch Type A: G3siV6 and Switch Type B: G3siV8. I run T1 between 2 switches. When a call comes to Switch A the user answers the call and is able to transfer calls to Switch B. My problem is that the call display on Switch B shows outside call and TAC. I need to see name and the person who transfered the call from Switch A to Switch B (name and extension).

The setup of Switch A and Switch B are the same.

Service Type: TIE
Send Calling Number: y
Send Connected Number: y
Send Name: y
PBX ID: 3

How can I program both switches so when a call from switch A and gets transferred to switch B the name and the extension of the person transferring the call appear on the display?

Your help will be greatly appreciated.

 

[ctr999]

I'm not 100% sure, but don't the trunks need to be ISDN-PRI to pass that information?

 

[DAVIDPAYNE]

Do you have DCS turned on?

 

[JZJerry]

dcs is turned on using isdn d-channel

 

[Midstream]

Do you have the DCS field flagged to y?

change trunk-group 5 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: internal Wideband Support? n
Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member:
Send Name: y Send Calling Number: y
*******Used for DCS? n*******
Suppress # Outpulsing? n Numbering Format: public
Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider