network config

[rmarc]

I was wondering if any one could help me?
Here is my problem
I have a Lan at one site with 8 users and 5 servers.
This Lan connects over a frame relay T1 to a secure data center, which has 8 servers, a router and a watchgaurd firewall then out to the internet. Network traffic is configured to go from to Lan over the frame t1 out through the firwall to the internet. I want to implement atleast one cisco pix 506e firewall at the lan site and have traffic pass through the cisco to the remote site and out through the watchgaurd. help

 

[havanajoe]

It sounds as if you need a router rather than a pix firewall.

 

[lgarner]

Basically, the Pix will be positioned inline between the LAN and it's frame-relay router.

Lan Switch/Hub -- Pix -- Router -- T1 -- Router -- Watchguard -- Internet