Guest_imported
New member
- Jan 1, 1970
- 0
how can I determine the port on my Netware server used for Web-Based Management?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Netware 5 Web Based Management
- Thread starter Guest_imported
- Start date
- Status
salserocito
MIS
If you are talking about the NetWare Portal Service... the Port is 8008.
If you have SLP properly configured on your Servers, you can verify this by issuing the folowing command at a Console Prompt...
DISPLAY SLP SERVICES PORTAL.NOVELL
The information that you will get back will look like the following...
service
ortal.novell://<IP ADDR>:8008/<SERVERNAME>
Good Luck!
If you have SLP properly configured on your Servers, you can verify this by issuing the folowing command at a Console Prompt...
DISPLAY SLP SERVICES PORTAL.NOVELL
The information that you will get back will look like the following...
service
ortal.novell://<IP ADDR>:8008/<SERVERNAME>Good Luck!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question