I have a tunnel set up and working with two netscreens. I need to allow users from the other end of the tunnel to connect to the webgui to configure it. (on My end is a NS50, the remote NS is a NS5). Where can I allow other networks other than the local network to access the WebGUI?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Netscreen WebGUI
- Thread starter efector
- Start date
There is a checkbox in the WebUI for remote management off of the untrust interface, you can set the management IP there (I think it defaults to the IP of the untrust side, not sure, not at work right now!).
This is true for 5GT's at least. Please post how it works out, I've never deployed one that could be managed from the untrust side via VPN.
cheers, Tom
"I would rather have a free bottle in front of me, than a pre-frontal lobotomy..."
-Shrubble
This is true for 5GT's at least. Please post how it works out, I've never deployed one that could be managed from the untrust side via VPN.
cheers, Tom
"I would rather have a free bottle in front of me, than a pre-frontal lobotomy..."
-Shrubble
- Status
Similar threads
- Locked
- Question