NetFinity7000 M10

[tigreguy]

Cortoze:
I am running windows 2003
RAID Machine Type 3520
Model# 2RU
1S3520-2RU23139629
IBM ServeRAid 3H/3L Controller

I am able to see all drives except in windows.
Including the array.
One the error codes I am recieving is only with the light indicators above each of the 10 drives. When I start the Mass Device I have all green lights, then after a bit of time most all of the lights turn amber. I am asking my partner to sign onto tek-tip also so he can possible explain any other symptoms I the server/raid is experiencing.
If there is any other information you require please ask.


Thanks

 

[catorze]

What version of the ServeRAID device driver are you running? Is it the same version as the firmware on the Controller? Do you get any messages during boot about the Drive configuration? You can look from the mini-utility (Ctrl+I when prompted) If every shows as it should in Crtl+I, then it is most likely a software problem with Windows. Were you ever able to see the drives? Was this a new installation? Upgrade?

More to follow depending on your responses.