Have you got the system site ID, or can you go into LD 143 to print off the feature set details?.
i.e.
>LD 143
.UPGRADE
SOFTWARE INSTALLATION PROGRAM
************************************
Verify
Security ID: 10248745
************************************
Call Server/Main Cabinet Software Installation Main Menu :
1. New Install or Upgrade from Option 11/11E - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay
Enter Selection : 3
Utilities Menu :
1. Restore Backed Up Database
2. Archive Database Utilities
3. Install Archived Database
4. Review Upgrade Information
5. Clear Upgrade Information
6. Undo Installation (If previous upgrade was from R25.40 or higher)
7. Flash Boot ROM Utilities
8. Current Installation Summary
9. Change 3900 series set languages.
10. IP FPGA Utilities
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay
Enter Selection : 8
From this we should be able to see if it had the networking package enabled.
Also go into LD 22 and key in
i.e.
>LD 22
REQ PRT
TYPE PKG
look to see if packages 148, 161, 175? etc exist.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support