Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
need help moving extensions on merlin magix
- Thread starter adh111681
- Start date
Couple of ways, simplest is to swap the cables at the Magix, then it's just a plug-n-go operation and no programming involved. Before starting, be sure to label cables with existing port number and person, then when all is satisfactory, change cable labels to reflect current port and user.
More involved is to renumber extensions, especially if there are several changes, as Labelling is not updated and must also be changed for each extension.
More involved is to renumber extensions, especially if there are several changes, as Labelling is not updated and must also be changed for each extension.
- Status
Similar threads
- Question
- Locked
- Question