Need help installing PRI on NT5D12AHE5

[dadz]

Hey guys,

I've searched all over and cannot find concise instructions on how to do this.

I need to install a new PRI circuit (as DID) on an M1 81c. Detailed instructions and configuration examples would be greatly appreciated.

I need to know things like - How do I determine what loops to use, clocking setup, etc.

Thanks in advance!

 

[PERRYPJ]

Document Number: 553-3001-201
This is the ISDN installation section. It includes all of the different PRI cards as well as the different DCH cards. It will bring you through the process step by step.
I would recommend if you have a spare PRI card / port of a dual card set it up and program it first. The LEC will be installing a new ckt anyway. Have them put a test DID number on the new ckt. Once you are all up and running then you can cut over all the traffic

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[johnpoole]

your not going to learn every step here.. where to start. ld 17 add the card (chg cequ) add the adan ld 17 chg adan new dch.. then add the route in ld 16 then add the trunks.. then in 96 dis the enl msdl x fdl. then in 60 enll the loop..

if this is the 1st did in the switch be sure to modify net data prior to starting... and i have posted the complete code for this more then once..

john poole
bellsouth business
columbia,sc