Need Help Figuring Config Out 1

[sanstain]

I need to connect multiple 3750G(at cust site with customer's IP addressing) to a switch over a 100mb Fiber link (rj45 form to my switch) with my 3750G. Each cust will have their own rj45 private link from their site to mine. I need a piece of equipment at cust site to be able to ping\connect to a like piece of equip at my site. The switch at my site will have an IP assigned by me (my addressing scheme). I will vlan off each customer so that the traffic is isolated. What is the best way to enable a customer's site to communicate to mine? Maybe some sort of NAT or static route but I am not even sure if the 3750s can do routing???? I am very green on cisco lan\wan but can help anyone who needs it with storage questions (SAN NAS FABRICS ETC ETC)

Drawn Out:

custIP.x--->customer.3750____________my.3750--->myip.x

then my.3750-----> offsite through fiber sfp

I need this done, the 3750 may\may not be the equip to use but I need something in that price range give or take

Thanks.

 

[baddos]

The 3750s can do routing. Just turn your customer ports to routed ports and not switchports. Then you can assign a /28 subnet to it and just have their router put right into that port. Your 3750s will act as default gateways for your customer's routers.

 

[sanstain]

That is what I thought, Thanks for the validation. -ss