Need good, clear documentation on configuring VOIP Dial Peers, etc.

[mrgauth]

I am being charged with configuring a dozen gateways with our corporate dialing plan, and I need a good source (book, whitepaper, webpage, whatever) for easy, clear, yet detailed instructions on how to configure dial peers,voice ports, and everything else related to that subject.


Anyone know where I can look? I have gotten a few whitepapers off of cisco.com, but they don't elaborate much and are often not explained well-leaves more questions than answers.

Any suggestions would be appreciated.

 

[computerhighguy]

This is probably better suited in the call manager forum, but I will try to help.

Start with these and come back with any questions.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml

http://www.cisco.com/warp/public/788/voip/in_out_dial_peers.html

http://www.cisco.com/warp/public/788/voip/in_dial_peer_match.html

http://www.cisco.com/warp/public/788/voip/valid_dial_peers.html

http://www.cisco.com/warp/public/788/voip/direct_inward_dial.html

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a0080080aec.html

It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)