Ned to reset 2600 to factory defaults

[dsullinger]

We are a Nortel shop, but we have purcahsed our first Cisco 2600. I'm learning how to configure it, but someone else in our group has been messing around with it also and I now need to reset the config to factory defaults, how do I do this?

Thanks

 

[hinds57]

dsullinger, This is called a null router config and to do this you need to set up a tftp server..(laptop). Here is a link with all the info you could possibly need to know about loading and maintaining your cisco IOS images.

Good Luck

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a00800c6c63.html

 

[dx1]

Just do a wr erase and then reload.