Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC IVS 2000 software
- Thread starter dhlad
- Start date
belevedere
Instructor
If you are connected via MAtWorx, look at the top line. It will show you what software level you have. It should be a letter + number combination. EX: P1 1.04.
You can also go to the MOC mode and look at CMD F85>FF03, FF04 to find the same information.
If you have an older IVS system, then you must use the MOC mode and CMD F82>0,1 to get the version.
You can also go to the MOC mode and look at CMD F85>FF03, FF04 to find the same information.
If you have an older IVS system, then you must use the MOC mode and CMD F82>0,1 to get the version.
- Thread starter
- #3
belevedere
Instructor
You have an IVS2 with software level 2300 (D1), rev 8.20
- Thread starter
- #5
- Status