DaveThePhoneDoctor
Vendor
Hi I am looking for an installation and programming manual for an NEC Electra professional 6X8. Any links you can suggest.
Dave, The Phone Doctor
Las Vegas, NV
Dave, The Phone Doctor
Las Vegas, NV
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC Electra Professional 1
- Thread starter DaveThePhoneDoctor
- Start date
- Status
-
1
- #2
markwho
Technical User
- Apr 18, 2005
- 9
What level is the system? The manuals for the EPRO are very hard to come by. The EPRO for the most part programs like the ELITE 48/192 and the IPK.
Also note that on the NEC Elite and IPK you can program from any phone in the system by using a "back door" that NEC does not document. Press FEATURE #0* 8974.
Also note that on the NEC Elite and IPK you can program from any phone in the system by using a "back door" that NEC does not document. Press FEATURE #0* 8974.
NEC Electra Professional CID
Hi,I would like to know the memory blocks for the CID programming on the NEC EPRO 11 ,and also the data to enter in those blocks. I found most of the memory blocks,but I am not sure what data to enter.
Regards
Roop Jag
Hi,I would like to know the memory blocks for the CID programming on the NEC EPRO 11 ,and also the data to enter in those blocks. I found most of the memory blocks,but I am not sure what data to enter.
Regards
Roop Jag
- Status
Similar threads
- Locked
- Question