NCOS, XRLS

[vasquezwilmer]

How Can I setup the NCOS restriction? NCOS 1 for internal call only, 2 for internal and local call, and so on.


Thnks

Wilmer

 

[dlesap]

Print it:
LD 49
REQ PRT
TYPE FCR
CRNO x (from 0 to yy)

Change it:
LD 49
REQ CHG
TYPE FCR
CRNO x (from 0 to yy)
DENY zzz
ALOW iii

 

[GHTROUT]

http://www.ghtrout.com/ghtrout/bars/index.html

~

http://www.GHTROUT.com/

 

[johnpoole]

did you find what you needed? the simple answer is build rlb and point them to your routes.. make the lowest rlb x and poin that to your locals and give it an ncos of 2.. that build a path that a station can use if it has an ncos of 2.. then build another, frl of 4 and point it to the ld trunks.. now the station needs a 4 or higher for local plus ld... i ussally leave the odd numbers for odd things that can come up... 0 internal, 2 local 4 ld 6 international... then if i need to build a station that can dial internal plus one site, i can add that as ncos 1.. or if i have a dept that needs local plus the area codes withen the state i cound add that as 3.. i allow ncos 0 911 access and usually allow local 1800 as a rule.. that is left up to the people i am doing the insatll for

john poole
bellsouth business
columbia,sc