black241988
Programmer
Is there a way to find out the NCOS matrix for the option switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NCOS matrix for option switch
- Thread starter black241988
- Start date
- Status
bigindian65
Technical User
prt all your RLIs in 86 and know what each is for - local, LD, 011, etc. Note FRL of each. prt sets, is there a common NCOS? Maybe 1 setting for agents, another for Supervisors, IT, Facilites, etc. Prt NPA, NXX, SPN, not which RLI is referenced. prt CDP as well, I think that is what you are asking?? If you didn't build it, takes slight research.
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #3
black241988
Programmer
our common NCOS is 15 and what is an RLI we set our RLI to 1 in some switches and 3 in others i think we kind of go off of our MSL switch for ncos's but not sure thats why i was wondering just to make sure becuase we have a different ncos for when we program fax machines from other phones
- Status
Similar threads
- Locked
- Question
- Locked
- Question