Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NBU 3.4

Status
Not open for further replies.

Dorga

MIS
Jul 30, 2003
101
NZ
Guys,

We have one very old server running 3.4. (The pain!)

The server crashed, the drives were all lost, the 3.4 install disks are gone....... Where can you get 3.4 these days? I looked around support but didnt see it and do not remember the site.

I know, it should be upgraded, but this is not for backups, this is to keep around for restores only and an upgrade was turned down before the crash.

We have all the tapes, and the catalog tapes, just need to get a server up and running and then try to make things recoverable.

Ideas?
 
You have an old 3.4? Unless you went to a different solution, that means you probably have a more current version that you are using.
If that is the case then you should have a sales rep or reseller that should be able to supply you the 3.4 software if you bribe them with future potential :)


Bob Stump
VERITAS - "Ain't it the truth?"
 
Unfortunatly, the decision was to move to TSM, so it is what it is.. =(

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top