Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NAT-Src pool must be of the same subnet as the interface

Status
Not open for further replies.
andf1

andf1

Technical User
Sep 10, 2003
43
US
Is there any way on a Netscreen firewall to use a NAT-SRC pool from a subnet other than the subnet of the IP address or secondary address configured on the incoming interface?

I am using a Netscreen 204 with 5.0.0r8.0 (Firewall+VPN).

Thanks,

Andy
 
Sort by date Sort by votes
Hello,

No, this is a restriction to ScreenOS. I think you could use a Route based VPN using a "Tunnel Int", but I have never tried that approach.

Rgds,

John
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

2
  • Locked
  • Question
Loss of my privacy
Replies
12
Views
2K
Rick998
Rick998
intel233
  • Locked
  • Question
Cisco ASA 5510 -Static NAT Help
Replies
8
Views
975
intel233
intel233
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
761
nnaarrnn
nnaarrnn
Russtoleum
  • Locked
  • Question
SW GVC won't route traffic through sonicwall to offsite tunnel unless it leases an ip on the same su
Replies
1
Views
286
Russtoleum
Russtoleum
Sparrow4
  • Locked
  • Question
Configure Avaya IPO R11 / VM Pro + Office365 or Exchange for voicemail to email
Replies
2
Views
806
Johnkite
Johnkite

Part and Inventory Search

Sponsor

Back
Top