Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
name presentation from a external call
- Thread starter rv68
- Start date
BaseBall2000
Vendor
You will need to check Facility IE in your gateway config….Display IE just displays the # , Facility IE displays Name and #
- Thread starter
- #3
Hi BaseBall2000,
Thks, but the checkbox "Send Calling Name In Facility IE" in the part "PRI Protocol Type Specific Information" from the Gateway configuration is unchekable.
This option permit the name presentation from the external operator ?
I'will that the call search the name correspondace in my contact's Exchange list.
Thks, but the checkbox "Send Calling Name In Facility IE" in the part "PRI Protocol Type Specific Information" from the Gateway configuration is unchekable.
This option permit the name presentation from the external operator ?
I'will that the call search the name correspondace in my contact's Exchange list.
- Status
Similar threads
- Locked
- Question
- Locked
- Question