vegasnortel
Vendor
Customer is running a 8 port fiber nam w/4.1.05 on a MICS 6.1 System. The trouble is that with very little call volume, the system is kicking back calls transfered to extensions because VM will not pick up at 4 rings. If you try F983 I get "VM Busy". After I wait a few seconds, it will let me in. When the VM said busy, I quickly went into system admin to show that only 1 set was active in system "Module Status". Is there anything that you guys (and gals) can recommend me to check further to assist my troubleshooting in this matter?
I appreciate your help!
VM uses P301, 302, 303, and 304 with B1 and B2 Channels for a total of 8 ports.
Rich
702-325-5805
I appreciate your help!
VM uses P301, 302, 303, and 304 with B1 and B2 Channels for a total of 8 ports.
Rich
702-325-5805