My definity system does not block incoming calling number set to restr

[AntBan]

Hello,
I have a Definity PBX connected to another PBX using PRI-QSIG signalling. All is well except for calling number being displayed on the Lucent station even though the originating switch sends calling number presentaion bit set to "restrict".
Does anyone know how to set-up the Lucent Definity so that it does not pass the calling number info., on an incoming call, to the terminating Lucent sation when the calling number is set to "presentation restrict". I need this to work by per call basis. If calling number is received by Definity set to "presentation allowed" it must display calling number on phone station.
Calling Name works fine.

 

[clausen]

If I understand you correctly, you want, on a call by call basis, to send, or not send Calling Party information. If you never want a paticular stations calling party information to be sent, on the station form set the field "Per Station CPN - Send Calling Number" to "n". If you are sending it and want to not send it for one call, then use the feature code set up in the "change feature-access-codes". It provides a Per Call CPN Blocking code and a Per Call CPN Unblocking code. I think thats all ther is, if memory serves me correctly, I've done this for some Police Departments before. If not let me know.

Chris

 

[wilsontec]

you can use the field of "calling number : delete "all""
in your trunk group form in page 1 about bottom of left hand side.