mwi activation on centralized audix

[jconrad0305]

i need some help with an ipo 3.1.56 connect via qsig pri to g3si with centralized audix. the message waiting lamps will not go off and on. here is the log. the ext number trying to light is 2804.





724502mS ISDNL3Rx: v=1 peb=1
ISDN Layer3 Pcol=08(Q931) Reflen=2 ref=126E(Remote)
Message Type = Facility
InformationElement = FAC
0000 1c 22 9f aa 06 80 01 00 82 01 00 a1 17 02 02 0a ."..............
0010 d7 02 01 50 30 80 80 07 32 32 32 32 38 30 34 0a ...P0...2222804.
0020 01 00 00 00 ....
724508mS CMLineRx: v=1
CMFacility
Line: type=Q931Line 1 Call: lid=1 id=24 in=2
Product Unknown
IE CMIESupplementaryService (5)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
MwiActivate.Invoke
invokeId 2775
user '', msgs 65535
724509mS CMLineRx: v=1
CMFacility
Line: type=Q931Line 1 Call: lid=1 id=24 in=2
Product Unknown
IE CMIESupplementaryService (5)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
MwiActivate.Invoke
invokeId 2775
user '', msgs 65535
724509mS CMLineTx: v=1
CMFacility
Line: type=Q931Line 1 Call: lid=1 id=24 in=2
Product Unknown
IE CMIESupplementaryService (5)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
MwiActivate.ReturnError
invokeId 2775
user '', msgs 65535

 

[CarGoSki]

You should post the dchannel messages associated with turning the lights on or off.

 

[jconrad0305]

how do i get that?

 

[CarGoSki]

Trun on ISDN layers 1+2+3

 

[jconrad0305]

layer 3 is up there i will turn on 1 and 2

 

[jconrad0305]

2047474mS ISDNL1Rx: v=1 peb=1
0000 00 01 01 6a ...j
2047474mS ISDNL2Rx: v=1 peb=1
0000 00 01 01 6a ...j
2047488mS RES: Tue 2/5/2006 16:14:58 FreeMem=48271568(9) CMMsg=6 (6) Buff=100 622 498 558 5 Links=8666 Elements=0
2047567mS ISDNL1Rx: v=1 peb=1
0000 02 01 5a 6a 08 02 12 6e 62 1c 22 9f aa 06 80 01 ..Zj...nb.".....
0010 00 82 01 00 a1 17 02 02 0a e3 02 01 50 30 80 80 ............P0..
0020 07 32 32 32 32 38 30 34 0a 01 00 00 00 .2222804.....
2047568mS ISDNL2Rx: v=1 peb=1
0000 02 01 5a 6a 08 02 12 6e 62 1c 22 9f aa 06 80 01 ..Zj...nb.".....
0010 00 82 01 00 a1 17 02 02 0a e3 02 01 50 30 80 80 ............P0..
0020 07 32 32 32 32 38 30 34 0a 01 00 00 00 .2222804.....
2047568mS ISDNL3Rx: v=1 peb=1
ISDN Layer3 Pcol=08(Q931) Reflen=2 ref=126E(Remote)
Message Type = Facility
InformationElement = FAC
0000 1c 22 9f aa 06 80 01 00 82 01 00 a1 17 02 02 0a ."..............
0010 e3 02 01 50 30 80 80 07 32 32 32 32 38 30 34 0a ...P0...2222804.
0020 01 00 00 00 ....
2047569mS ISDNL2Tx: v=1 peb=1
0000 02 01 01 5c ...\
2047570mS ISDNL1Tx: v=1 peb=1
0000 02 01 01 5c ...\
2047574mS CMLineRx: v=1
CMFacility
Line: type=Q931Line 1 Call: lid=1 id=24 in=2
Product Unknown
IE CMIESupplementaryService (5)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
MwiActivate.Invoke
invokeId 2787
user '', msgs 65535
2047575mS CMLineRx: v=1
CMFacility
Line: type=Q931Line 1 Call: lid=1 id=24 in=2
Product Unknown
IE CMIESupplementaryService (5)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
MwiActivate.Invoke
invokeId 2787
user '', msgs 65535
2047575mS CMLineTx: v=1
CMFacility
Line: type=Q931Line 1 Call: lid=1 id=24 in=2
Product Unknown
IE CMIESupplementaryService (5)
Network Facility Extension
sourceEntity: 0
destinationEntity: 0
Interpretation APDU
rejectAnyUnrecognisedInvokePdu
MwiActivate.ReturnError
invokeId 2787
user '', msgs 65535
2047578mS ISDNL3Tx: v=1 peb=1
ISDN Layer3 Pcol=08(Q931) Reflen=2 ref=126E(Local)
Message Type = Facility
InformationElement = FAC
0000 1c 12 9f aa 06 80 01 00 82 01 00 a3 07 02 02 0a ................
0010 e3 02 01 50

 

[CarGoSki]

I will bet that your definity route number is being appended to your IPO extension number.

I could be wrong but are you using definity route number 222 and IPO extension/user 2804?

 

[jconrad0305]

yes how do i take that off? i am an ipo guy not a definity

 

[CarGoSki]

You will need a definity guy but yours probably looks similiar to this:

change uniform-dialplan 2 Page 1 of 2
UNIFORM DIAL PLAN TABLE
Percent Full: 0

Matching Insert Node Matching Insert Node
Pattern Len Del Digits Net Conv Num Pattern Len Del Digits Net Conv Num
28 4 0 222 aar n n



change aar analysis 2 Page 1 of 2
AAR DIGIT ANALYSIS TABLE
Percent Full: 2

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
222 7 7 959 aar 2 n


You will need to change it to this:

change uniform-dialplan 2 Page 1 of 2
UNIFORM DIAL PLAN TABLE
Percent Full: 0

Matching Insert Node Matching Insert Node
Pattern Len Del Digits Net Conv Num Pattern Len Del Digits Net Conv Num
28 4 0 aar n n



change aar analysis 2 Page 1 of 2
AAR DIGIT ANALYSIS TABLE
Percent Full: 2

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
28 4 4 959 aar 2 n


You are inserting-appending digits and need to remove them. This will work on cm 2.2 and above.

 

[jconrad0305]

what about if it is a gs31 r11. ? when i have the routing numbers removed i do not get the any mwiactivate or deactivate messages

 

[dontworx]

Did you ever get this problem solved?

 

[jconrad0305]

yes. there needed to be a route in the definity just for the message waiting lights also

 

[dontworx]

Thank you!

 

[dontworx]

Question? I am back to messing with this third party voicemail system that our customer has a contract with. Their system immulates an Audix. I got the centralized audix liscense to try it to see if we could get it to work. My question is I quess I am supposed to set up the back to back PRI connection as a PRI and not as a QSIG link? I noticed that when I set it to QSIG the line group will not show up as an option in the centralized Audix voicemail option. Thanks for any help!!!

 

[dontworx]

Well it is a most glorious day!!!!!!!! It finally works and the integration is tight between the two even the message button on the phone works! Thank you GOD! I mean that. We finally got all of the integration working to a third party voicemail (Adomo) using the centralized audix integration.