Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Music on hold Definity G3

Status
Not open for further replies.
xharryooo

xharryooo

Programmer
Mar 14, 2007
36
US
I am programming a Definity G3 for music on hold using a TN763D Aux. Trunk card. The program for this I am going to use is Cha system-parameters features. Is there anything else I need to know. Thx
 
Sort by date Sort by votes
Kevin where do I get the -48v dc power for this? Also is change system-parameters features the only program I will need to program?
 
Upvote 0 Downvote
You can get -48 Volts from the AUX cable or an 1151 power unit. System Features is where you administer the feature. I've seen many installations without the 909 coupler with the music source connected directly to the TN763 port.

Kevin
 
Upvote 0 Downvote
Kevin,
If I connect directly to the TN763....which do I use the 8 or 600 ohm output from my music source?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question
CMC Cabinet Connections for Definity G3
Replies
5
Views
349
dialtonebone
dialtonebone
A
Looking for Avaya DEFINITY G3csi R6 Tech / Media / Guidance
Replies
4
Views
417
AncientEnterprise
A
Turtlepuke
  • Locked
  • Question
Putting Someone On Hold Once Joined To A Conference?
Replies
3
Views
548
YPC
YPC
ack41
  • Locked
  • Question
Definity ECS R9.5 program card
Replies
3
Views
559
AvayaTier3
AvayaTier3
Richard_Harrow
  • Locked
  • Question
Easiest way to upload hold music on Avaya Aura Release 10? 3
Replies
1
Views
1K
ZeroZeroOne
ZeroZeroOne

Part and Inventory Search

Sponsor

Back
Top