Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple Subnets

Status
Not open for further replies.
mofusjtf

mofusjtf

IS-IT--Management
Joined
Apr 20, 2004
Messages
471
Location
US
I have a network with a Single DSL Internet connection but has 2 internal subnets 192.168.200.0/24 and 192.168.201.0/24. Is it possible to use a PIX 506 as my Internet router/firewall? Or what would the best solution for this? My customer wants to keep cost as respectible as possible. Thanks.
 
Sort by date Sort by votes
You could use the 506 as your firewall, but since you have multiple subnets, you need a seperate router to utilize it..

You could look at an IOS router with nat.


BuckWeet
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

stanlyn
  • Locked
  • Question Question
HowTo Install Multiple PAP2T ATA Devices on Same Lan
Replies
3
Views
647
iggsterman
iggsterman
evr72
  • Locked
  • Question Question
multiple devices multiple networks best practices help
Replies
1
Views
269
Speedline
Speedline
netguy2000
  • Locked
  • Question Question
C2960TTL multiple Trunk ports with same VLAN
Replies
1
Views
334
chieftan
chieftan
vippadil
  • Locked
  • Question Question
Cisco AP with multiple ssid and vlans
Replies
0
Views
239
vippadil
vippadil
alovelyparadox
  • Locked
  • Question Question
Cisco Router multiple isps failover and Nat config not working
Replies
0
Views
180
alovelyparadox
alovelyparadox

Part and Inventory Search

Sponsor

Back
Top